Mounting Your Generac Fuels Monitor

Installation of Your Generac Fuels Monitor

The cable that connects the sensor with the monitor enclosure is ~6 feet long. The enclosure has a magnet and is intended to be mounted on your propane tank with the magnet at the top corner. We suggest leaving a drip loop in the cable. 

Best Practices for Installation: 

Drip Loop Example: 

Mounting the monitor with a drip loop will allow the water to wick away from the device. 

Below Ground Tank: 

If you have a below ground tank, you may want to consider installing the monitor on a post, as the metal dome can impact signal strength. Here's an example from one of our customers:

If you want to learn more about installation best practices, make sure to look at our checklist!