Installation of Your Tank Utility
The cable that connects the sensor with the monitor enclosure is ~6 feet long. The enclosure has a magnet and is intended to be mounted on your propane tank with the magnet at the top corner. We suggest leaving a drip loop in the cable.
Best Practices for Installation:
Drip Loop Example:
Mounting the monitor with a drip loop will allow the water to wick away from the device.
Below Ground Tank:
If you have a below ground tank, you may want to consider installing the monitor on a post, as the metal dome can impact signal strength. Here's an example from one of our customers:
Article is closed for comments.