WARNING: Only fuel providers should replace dials as there can be a risk of tank depressurization.
If you don't have a remote-ready dial you should contact your propane supplier to have your dial replaced. If your supplier does not have the proper dials in stock, Tank Utility can provide you with a replacement dial.
Order a dial here, along with your monitor purchase: Dial Replacement Order
You'll need to give us the following information:
- The orientation of your tank: Vertical vs. Horizontal and Underground vs. Above ground
- A photo of your existing dial. Make sure the little words printed on the face are clearly readable in the photo!
- Your order number, if you've already placed an order.
Email us this information here. We'll ship a dial replacement to you along with your monitor order.
Get in touch with your propane provider to swap the dial:
Even if Tank Utility provides you with a replacement dial, you'll still need to call your supplier to have them install the dial within the gauge. It's a safety hazard for you to do it yourself. Tell your supplier that they only need to replace the dial: Only the two small screws need to come off. They can do this without de-pressurizing the tank. The gauge, which is inside the tank, does not need to be replaced.